Ecolab OGM PLUS, Руководство по настройке

Страница: 9 / 14

2 Intended use and installation
The OGM Commander Interface is used to configure the oval gear
meter
‘OGM
PLUS
’ .
2.1 Premises
PC with:
n 1 free serial (COM) Port
or
n USB-RS232 converter
or
n PCMCIA-Plug in card (for laptops)
2.2 Installation of OGM Commander-Software
To configure the OGM
PLUS
, the software: ‘OGM Commander’ is
required. This can be downloaded under the following link:
https://www.ecolab-engineering.de/fileadmin/download/software/
OGM-Software/OGMCommander_1004.zip .
Software download:
https://www.ecolab-engineering.de/fileadmin/
download/software/OGM-Software/
OGMCommander_1004.zip
After successful download of the packed file it must be unpacked on
the PC to be used and installed by executing the ‘SETUP.EXE’ .
Intended use and installation
3 Rev. 01-01.2020