Ecoglider RS I, Руководство пользователя

Страница: 12 / 40

Page 8
Riding method
Be familiar with all the spare parts of the E-bike and test all the electric functions before riding. Make sure all the spare parts for
the bicycle are in good condition, such as battery power, and tire pressure. The detailed operation is as follows:
Start-up
Insert the key into power switch at the right side of battery box,
turn to “ON” position, if the power display lights on, then power supply is normal.
1.Start-up by accelerator: turn the accelerator towards you(counter-clockwise),
and the rotation angle should be from small to large to start,
then you can adjust speed by turning the accelerator slowly,
the speed can increase to 20km/hour, but the actual speed depends
on weight, road surface, tire pressure and other factors.
2.
Start-up by pedal assistance: After turning on the power, you can also use your pedals to start-up the E-bike, then you can
control your speed with accelerator, as well as by pedaling the bicycle faster.
but please do not pedal too hard, in case it may damage the components of e-bike since it is mainly motor driven.