Cautions:
1. Always unplug the main cord before cleaning.
2. Use only tap water to clean the equipment. Do not use any chemicals.
3. Do not clean equipment parts in dishwasher.
4. Do not disinfect equipment parts in the sterilizing cabinet.
5. Make sure that the waste storage area is completely dry before
re-assembly.
6. Empty water from the waste storage area and wipe with a dry cloth.
7. Store the bed cleaner in its original box when it is not in use.
8. Send to designated maintenance facility if machine or power cable
becomes damaged.
1
Using 2 fingers, open and remove
the waste box.
2
Locate the groove in the filter. With one hand,
hold the waste box and with your other hand, hold
the groove in the filter and push it down with your
thumb. Then, you will see two filters. Wash filters
under tap water after use. The waste box filters
can be repeatedly used after drying.
4
Use wet cloth and neutral detergent
to clean the machine surface. Never
submerge the whole machine under
tap water for cleaning. Never put the
motor under water.
3
It is necessary to periodically clean the
inside back cover. Open the back cover
by removing the screw. Wash the sponge
of the cover with water and put it back into
place after drying. Do not open and repair
the equipment yourself.
Cleaning & maintenance
10
2
Insert plug into wall socket.
1
Remove the packing material and
the bed cleaner from box.
3
Place the unit on flat cleaning surface,
press switch to on, and the machine will
start working.
How to use
11
1. Remove the device from the original packaging. Review the user manual thoroughly
prior to first use.
2. Firmly and securely place the device on the surface to be sanitized.
3. Press the switch located on the handle to the On position.
4. Move the device over the surface to be sanitized in a back and forth motion, crossing
the area to insure the surface has been completely sanitized.
How to use
