Maintenance
DAILY MAINTENANCE : Cleaning at the End of Work
Step 1. Collecting Remaining Pretreat Liquid
( Step 1 + Step 2 )
2.) Open the top lid and
place the empty
bottle
underneath the left side of the nozzle.
3.)
Press and hold “CLEAN” button
for “
3 seconds
”
until you hear a beep. Then, the pretreat liquid will be
flushed out of the machine. Let it spray until most of
pretreat in the tube to be empty (about 7~10 secs).
4.)
Press “CLEAN” button
once again to stop spraying.
Then, the red light above “Start/Stop button” will be turned
on, meaning that the right side of the nozzle is ready to be
cleaned.
1.) Take out the filter from the bottle of pretreat liquid.
(Make sure to turn the valve on, otherwise filter will be
unable to suck the liquid)
Pretreat
Liquid
16