Control applications manual
General information
23
EN
1.
General information
Thank you for purchasing one of our ecoSMART control panels.
▪
This manual contains information on how to install, put into service and resolve any problems that
may arise with the ecoSMART control panel. Read this manual carefully before installing the
equipment.
▪
Keep this manual handy for future reference.
This manual contains two different kinds of warnings that should be heeded.
NOTE
▪
Indicates a situation that may cause material damage or equipment malfunction. This may also be
used to indicate practices that are recommended or not recommended for the equipment.
DANGER!
▪
W
arning of imminent or potential danger which, if not avoided, may result in injury or even death.
This may also be used to warn of unsafe practices.
The manufacturer is not responsible for any material damage and/or personal injury resulting from improper use or incorrect
installation of the equipment.
The device must be installed by a licensed installer in accordance with applicable local regulations and in accordance with the
instructions described in the installation manual.
1.1.
Safety considerations
The detailed instructions in this section cover important safety aspects and must therefore be strictly complied with.
DANGER!
▪
A
ll the installation and maintenance work must be performed by an authorized technician following
local regulations and according to the instructions described in the heat pump installation manual.
▪
C
hildren shall not play with the heat pump.
▪
I
mproper installation or use of the equipment could cause electrocution, short circuits, leakage of
working fluids, fire or other personal injury and/or material damage.
▪
K
eep the plastic bags included in the packaging out of the reach of children, as they could result in
injury through asphyxia.
▪
T
his equipment should not be handled by people with physical, sensory or psychological disabilities,
children and people with no suitable experience or knowledge, unless it is under the supervision or
direction of a person responsible for their safety.
▪
I
f equipment malfunction is detected, contact your technical service to solve any problems that may
have appeared.
▪
D
o not touch any of the internal components during or immediately after heat pump operation; this
can result in burns caused by cold or heat.
