Travel Notice:
Product Maintenance:
Product Battery Disposal:
Product Storage and Transportation:
Product Charging:
You now own the best quality Portable Battery Generator in the world. This brief pamphlet is meant to help
you. Please take some time to read it before using the product. Read it through to fully understand how to
use the Lithium Generator!
RIVER 600 PRO Use Care and Safety Guide
CONGRATULATIONS!
NOTICE
10.
Do Not allow pins, wires or other metal pieces to insert to the device case, outlets or controls. Metal pieces
may short circuit the product.
11.
Avoid collision. DO NOT place heavy objects on the machine.
12.
If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and
result in energy loss or inability to charge.
1.
Always use EcoFlow approved charging cables. EcoFlow does not response to any damage caused by using
non-EcoFlow charging cable.
2.
When charging, please place the product on the ground with no flammable or combustible materials around.
To prevent accidents, never leave the machine unattended during charging.
3.
DO NOT charge a product immediately after a long heavy load, because the product’s temperature may be
too high. DO NOT charge a product until it cools down to room temperature. The product may be unable to
charge out of the temperature range 32
ºF
to 104
ºF
(0 to 40
℃
)
. The ideal charging temperature range is 71
ºF
to
82
ºF
(22
℃
to 28
℃
)
.
It is forbidden to carry lithium batteries and equipment with a capacity greater than 160Wh on airplane due to
the regulation; Do Not bring this product on flights.
1.
Dispose the product in specific recycling boxes only after a complete discharge. Batteries are hazardous
chemicals. Please strictly follow your local regulations regarding the battery disposal and recycle.
2.
Dispose of the product immediately if it cannot be powered on after over-discharging.
1.
Never store the product in environments below -4
ºF
(
-20
℃
)
or above 140
ºF
(
60
℃
)
.
2.
If the product is not used for a long time, the battery life may be reduced.
3.
Fully charge and discharge the battery at least once every 3 months to keep the battery healthy.
1.
Keep the product out of the reach of children. If any children accidentally swallow parts, please go to a doctor
immediately.
2.
If a low-battery warning appears, charge the battery before store it. Otherwise, long-term storage may cause
damage to the battery in the product. Batteries in the product will enter hibernation mode if it is depleted and
stored for a long time. Recharge the product can bring the battery out of hibernation.
3.
DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, or a heating stove.
4.
Store the product in dry environments. Please keep the machine away from water.
5.
Make sure no small metal objects can fall on or around the product while in storage.
6.
Never ship a product with a battery power level higher than 30%.
To turn RIVER 600 PRO on or off, you need to PRESS and HOLD the ON/OFF system Power Button. To turn
on the AC power outlet, you need to PRESS and HOLD the AC Button after turning on RIVER 600 PRO. We
set the AC power button for users to turn off AC power when they don’t need it to save power usage. Please
follow this introduction step-by-step to be familiar with each of RIVER 600 PRO’s ports, buttons, display
screens and more. Please fully charge (100%) your RIVER 600 PRO before use it.
