ecofires eko 5050, Инструкция по установке и эксплуатации, Страница: 10 / 16

FITTING THE DECORATIVE FRAME ASSEMBLY
Eko 5050 Models :
Remove the decorative frame assembly from any protective packaging, and remove any protective film that
may be present on the frame.
The frame is hung onto the firebox via the
two upper hanging brackets and then
secured to the firebox via the two lower
knurled fixing bolts, which are inserted
through the holes in the lower frame
mounting brackets after the frame is in
position. See figures 8 and 9
.
Eko 5060 Models :
Remove the glass facia panel from any pro-
tective packaging. The glass facia panel is
supported by four M6 screws which pro-
trude from the front of the outer casing.
Ensure each screw is unscrewed approxi-
mately one turn from the fully screwed in
position in order to create a 2mm gap
(shown in figure 10).
Simply hang the facia panel onto the outer
casing (figure 11) ensuring that the corre-
sponding keyhole shaped holes engage the
screwheads fully.
7
8.4
Eko 5050 Models
Eko 5060 Models
2mm
Figure 9
Figure 8
Figure 10
Figure 11
©
2009 Focal Point Fires plc.