This fire is fitted with LED’s (Light Emitting Diode) in place of conventional bulbs. LED’s generate the same light levels as
conventional bulbs, but use a fraction of the energy consumed. LED’s are maintenance free and will not require replacing during
the life of the product.
2.0 INSTALLATION REQUIREMENTS
3.0 APPLIANCE DATA
4.0 FIXING KIT CHECKLIST
1. M4 x 8mm Screw x 12
2. Large Wall Anchor x 5
3. M5 x 50mm Screw x 5
5.0 COMPONENT CHECKLIST
1. Glass Fascia
2. Firebox
3. Mounting Bracket
4. Table Top Support
5. Front Brace
6. Heat Deflector
©
2016 Focal Point Fires plc.
3
1.0 IMPORTANT NOTES - CONTINUED
GB IE
Supply Voltage and rating power :
220-240V~ AC 50Hz, 1260-1500W
Fuse Rating :
13 Amp
Heating Elements :
1260-1500W
Lighting :
LED (not replaceable)
Location :
Indoor use only
Supply plug/cord : BS1363/1.8 metres length
• DO NOT cover or obstruct the heater in any way. Overheating will result if it is
accidentally covered.
• Never immerse the product in water or any other liquids.
• DO NOT use the appliance outdoors.
• Before cleaning the appliance, ensure it is unplugged from the power and that it is
completely cool.
• DO NOT clean the appliance with abrasive chemicals.
• Never use accessories that are not recommended or supplied by the manufacturer. It
could cause danger to the user or damage to the appliance.
• DO NOT insert or allow foreign objects to enter the inlet or outlet vents as this may
result in electric shock, fire or damage to the appliance.
• DO NOT install the fire using an extension cord.
• Unplug from the mains supply if the appliance is not to be used for long periods.
• For installation and maintenance details refer to page 5-9.
The appliance is supplied with a pre-wired three pin plug (13 Amp fuse rated) and 1.8 metres of electrical cable. It is therefore
necessary for a suitable electrical socket to be located within this distance and be easily accessible. This appliance is designed to
be wall hung, using the wall fixtures/fixings provided. DO NOT recess any part of appliance into the wall. This appliance is
suitable for installation in static holiday/park homes.
