INSTALLATION
INSTRUCTIONS
1. Turn on kitchen faucet (cold) and then close the cold
water supply valve to relieve water pressure.
2. Select the desired loca on for the
fi
lter system.
3. NOTE: This system can either be mounted to an
interior wall surface or it can installed with the system
placed on the
fl
oor of the cabinet– ver cal only.
You will be connec ng to the exis ng line with 3/8”
tubing and
fi
ngs (SUPPLIED).
3. If moun ng to interior wall; using the
fi
lter head
(Figure 1) as a guide, mount the
fi
lter head to the
wall with the supplied moun ng screws. Allow 3
inches of clearance from bo om of the
fi
lter for ease
of
fi
lter removal.
4. Place a towel around the supply valve and then
proceed to remove the cold side hose from your cold
water supply valve that feeds water to the faucet.
5.
Install the female adapter
fi
ng to the male thread
on the cold water shut
‐
o
ff
valve (Figure 2) This
should be a secure
fi
t. DO NOT OVERTIGHTEN.
Figure 1.
Dimension A: 2.75 inches
Dimension B:
19 i
n
ches
Figure 2.
Female Adapter
