Installation Methods
Notice before installation
All electrical matters should be performed by a professional electrician or
electrically competent person according to local regulations.
Please install a leakage circuit breaker to protect against electric shock.
Please use a leakage circuit breaker whose rated power is 10A,AC230V
Guide
for installing
dryer
hand
the
Connecting to the fused spur
•
A fused spur will need to be situated in the location if one is not already present to
connect the power cable.
•
Ideally the fused spur should be situated to allow for the power cable to enter the hand
dryer 1100mm from the ground and
approx. 90mm to the right from the central fixing
hole of the mounting plate. (See diagram in stage
2 -
Installation
of
mounting plate)
•
The
minimal length of power cable entering the hand dryer, through the power cable
entry hole, should be 300mm
Installation of mounting plate
Please fix the hand dryer firmly to the wall to avoid damage
•
Install on a flat, solid wall using the dimensions (mm) on the below diagram as a guide
