Ecodhome 01335-2013-00, Руководство по установке

Страница: 16 / 21

16
into “exclusion” mode, and press the inclusion
button of sensor once to be excluded.
Note: During the inclusion/exclusion phase, the device
should be within 1 meter of MyVirtuoso Home gate-
way.
3. Remove the bracket from the detector by rotat-
ing it anti-clockwise.
4. Place the bracket where you are going to install
the detector. In each keyhole slot, draw a mark to
locate rawl plugand screw. Using a 5mm drill bit,
drill two holes at the marks and insert rawl plugs.
Attach the bracket by using the screws.
5. Suggested CO detector positioning: