18
sion. When the detector is first powered up, the
LED flashes on and off alternately and repeatedly
at 2-second intervals. This means that it has not
yet been assigned to MyVirtuoso Home gateway.
2.
For inclusion: put MyVirtuoso Home gateway
into inclusion mode and press the button 3 times
within 1.5 seconds. Detector beeps when button
is pressed.
3.
For exclusion: put MyVirtuoso Home gateway
into exclusion mode and press the button 3 times
within 1.5 seconds. Detector beeps when button
is pressed.
Note:
During the inclusion/exclusion phase, the device
should be within 1 meter of MyVirtuoso Home gateway.
Mounting
The device has been designed for residential use. For
a total coverage of the building, you need to place a
device in each room.
The detector is not able to detect the presence of
flames , gas, heat.
1.
Define the number of devices required for instal
-
lation.
2.
Always place the device in the center of the ceil
-
