Ecodense CELL CONDENSE 1040 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 36

Ecodense CELL CONDENSE 1040 Скачать руководство пользователя страница 2

20.01.2022 Rev. 00

1

DEAR USER,

The Condensing Boilers ECODENSE CELL CONDENSE 300, CELL CONDENSE

420,  CELL  CONDENSE  480,  CELL  CONDENSE  600,  CELL  CONDENSE  720,  CELL
CONDENSE  900,  CELL  CONDENSE  1040,  CELL  CONDENSE  1210,  CELL
CONDENSE 1310, CELL CONDENSE 1510, CELL CONDENSE 1810, are constructed
and manufactured according to the most advance technological inventions and the  safety
rules. It is easy to use for our customers.

We recommend that you read this manual and safety warnings thoroughly before the

use of the device in order to ensure safe, cost effective and environmental-friendly use.

If you encounter any issue that is not explained clearly in this manual or you could

not understand, please contact with our service department.

We thank you for choosing ECODENSE brand.

This Operating Manual is an integral part of the device and must be maintained in a

plastic dossier and hung at a clearly visible place by the device.

TERMO ISI S

İ

STEMLER

İ

SAN.VE T

İ

C.A.

Ş

.

Esentepe Mah.Milangaz Cad. No:75 K:3

Kartal Monumento Plaza

Kartal/

İ

STANBUL/TÜRK

İ

YE

Tel: +90 216 442 93 00

Fax: +90 216 370 45 03

www.ecodense.com

e-mail:[email protected]

«
1
2
3
4
...
»

Содержание CELL CONDENSE 1040





































Отзывы:

Нет отзывов