manualshive.com logo in svg

Ecodan EHPT15X-UKHDW1S, Руководство по обслуживанию

Поделиться
Скачать
Ecodan EHPT15X-UKHDW1S Скачать руководство пользователя страница 20

20

Setting the Main remote controller

After the power has been connected to the outdoor and cylinder units (See "7. FIELD WIRING"), the initial system settings can be entered via the main remote con-

troller.

1. Check all breakers and other safety devices are correctly installed and turn on power to the system.

2. 

setting screen in order. 

3. Main remote controller will automatically start up. Wait approximately 6 minutes whilst the control menus load. 

4. When the controller is ready, a blank screen with a line running across the top will be displayed.

5. Press button E (Power) (refer to page 29) to turn on the system. Before turning on the system, perform initial settings as instructed below.

General Operation

●

 The highlighted icon will appear as a larger version of the centre of the screen.

● Press CONFIRM to select and edit the highlighted mode.
● 

 Follow the <Main remote controller Menu T

ree> for further setting, using ◄► buttons for scrolling or F1 to F4 for selecting.

Main Settings Menu

The main settings menu can be accessed by pressing the MENU button. To reduce the risk of untrained 

end users altering the settings accidentally, there are 2 access levels to the main settings; and the service 

section menu is password protected.

User Level – Short press

If the MENU button is pressed once for a short time, the main settings will be displayed but without the edit 

function. This will enable the user to view current settings but 

NOT

 change the parameters.

Installer Level – Long press

If the MENU button is pressed down for 3 seconds the main settings will be displayed with all functionality 

available.

The colour of 

▼

▼

The following items can be viewed and/or edited (dependent on access level). 

•  Domestic Hot water (DHW)

•  Heating/Cooling 

•  Schedule timer

•  Holiday mode

•  Initial settings

•  Service (Password protected)

Main menu

Long Press

Initial setting wizard

ime setting screen and Main 

settings menu screen in order

. Enter the desired number using the function keys and press CONFIRM.

 

Note: 

<HEATER CAPACITY

 RESTRICTION>

This setting restricts the booster heater capacity

. It is NO

T possible to change the setting after starting up.

If you do not have any special requirements (such as building regulations) in your country, 

skip this setting (select "No").

• Hot water (DHW/Legionella)

• Heating/Cooling

• Operation (ON/Prohibited/

Timer)

• Pump speed

• Mixing valve control

• HEATER CAPACITY

 RESTRICTION

Initial settings wizard

DHW SETTINGS

Operation mode

Skip

Содержание EHPT15X-UKHDW1S





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды