GLASS LID FOR ECOSERVE GN
INSTRUCTIONS FOR INSTALLATION & USE
FITTING THE STANCHION RODS AND DRAIN TUBE:
1. Glass Lid
2. Stanchion Rods X 2
3. Drain Tube
4. Drain Tube Spigot
5. Screws X 3
6. Allen Keys
7. Hinge Bracket
Thank you for purchasing this Glass Lid for the
EcoServe GN. It is an accessory used to cover dishes
of food placed on the EcoServe GN and can be
adjusted according to the height of the dish being
used. Please follow the use and care instructions to
ensure it retains its high quality finish.
FITTING THE LID TO ECOSERVE GN:
The glass lid is now ready to be fitted to the
EcoServe GN which is sold separately.
Some of the images below refer to parts of
the EcoServe GN.
CONTENTS:
8. Knurled Nuts
9. Hot Air Cover
10. Blanking Plate
8 9 10
1
3
4
5
6
2
7
1. Place the Glass Lid
(1)
upside down on a soft surface.
2. Screw the Stanchion Rods
(2)
into place.
3. Use the supplied 6mm allen key
(6)
to tighten.
4. Push the silicone Drain Tube
(3)
into place on the
spigot
(4)
. The angled cut end should face up.
Scan here
for video
instructions
1
2
2
6
3
4
