7
A: Input status: INPUT or NO INPUT
B
：
Input charging power meter.(in Watt)
C
：
Battery level: “FULL” means the battery is fully charged, and “20” means Battery very low,
please charge the Battery
D
：
Battery wrong or dead Alert: Check the battery or change a new battery
E
：
Battery is deep-discharged.
F
：
The operation temperature is too high, and the unit is under protection.
G
：
AC output overload protection is ON
H
：
Output power meter ( including the AC and DC load)
2.4 Power Output
A: Master “POWER” Switch: Turn on Master POWER Switch to start. The LCD will be ON.
B: ”DISPLAY” button: Press DISPLAY button to turn on LCD display backlight. It will last 5
minutes.
C: “AC” output Button: Press “AC” button to feed power to AC sockets. Plug in AC device to
power it up.
“AC” output button LED (green) to show AC power available. When AC output is overload or
abnormal, the LED flashes red, it goes off 3 minutes later. Push the AC button again to restart
the AC output power supply.
