AUTOMATION
The EMS Si can be configured to perform actions
based on the status of its 2 dry contact inputs.
You can have multiple actions per input. You
can also have the same input perform different
actions when it is open or closed. For example, if
a window sensor is open, you can configure the
system to adjust the temperature set point and
disable the AC.
Setting Up the Sensor Inputs
The EMS Si system supports 2 dry contact inputs
(R1 and R2). In order to use them, you need to
ensure they are correctly configured.
Name
To enable, simply enter a name for this input (i.e.
Door sensor). To disable this input, delete the
name.
Type
Defines the type of input (only Dry Contacts are
supported in this version).
Actions...
Lets you to view the current state and edit action
options for a sensor. To add a new action, select
Add New Action
.
State
Configure if the circuit (contact) is Open
or Closed.
Type
Select the action to perform from the
list:
To configure sensors and
automation
From the Home screen,
press
MENU
.
Select
Settings
▶
Installation Settings
.
Select
Sensors
.
Select the dry contact you
want to view or edit.
Configure the sensor
settings as required.
To create a new action,
select
Add New Action
.
34