@2021 EcoAir
-
V1.4
Page 11
All rights reserved
EMPTYING THE WATER TANK
The Water level Indicator lights up when the water tank is full. The appliance will stop operating.
Allow to stand for approximately 10 minutes to ensure all water collected drips into the water tank
before removing the tank.
1.
To remove the Water Tank
(A6)
, slide it out gently by gripping the water tank from bottom
Handle
(A7)
and pull out carefully.
2.
Remove lid.
3.
Pour the water away by tilting the water tank, (see step 3 picture) to the right side. Clean the
water tank if needed.
4.
Insert the water tank back into to the correct position. The Water Full light indicator illuminates
if the water tank is not correctly in position. If this happens, reinsert again.
NOTE :
•
Clean the water tank with mild detergent if necessarily. Do not use solvent, abrasive or
hot water.
•
When cleaning the water tank, take caution to avoid damaging the float.
•
Do not tilt the dehumidifier when removing the water tank. This is to prevent water
leaking which may cause electric shock.
Slide water tank out
Remove lid
Pour the water away
STEP 3
STEP 2
STEP 1
A6
A7
