© 2018 EcoAir 7 All rights reserved
Assembly
The upper hanger should be aligned with the rear guard.
Make sure both guard joints are latched correctly.
Buckle the lock on the bottom of the guard.
Front guard assembly:
The remote controller comes with assembled button cell battery (CR2032). Please remove the
insulation film before use.
To replace the battery after use, remove the battery cover by pressing and lifting the latch at
the lower side. Install the battery with the correct polarity.
To use the remote:
•
Aim the receiver on the fan base, Press and release a key at a time to transmit control
signals.
•
The fan will beep and react while receiving signals.
•
If the fan is set with Child Lock then only power off will work.
Remote control:
