TO EMPTY THE TANK
TO DRAIN WATER (Continuous Drainage)
TO START
6
hr
Water can be bypassed the tank by using the hose
provided.
Use a screwdriver to remove the knock-out
at the back. Attach the hose to the
connector through the hole. The hose
should lead to the drain with no sharp bends
and in a downward slope.
Do not insert small objects into the
vents to avoid damage
Back
When the tank is full, the " FULL " indicator
lights will illuminate and the unit will stop.
Don't remove the tank immediately
if the machine is still running or just
stopping. This may cause some water
to drip.
To remove the tank, hold the tank grip
then pull it out and hold it with
two hands carefully.
After pouring out the water, clean the
tank and restore in place.
To pull out
To hold with
two hands
To restore after
pouring
hose
Remove and reinstall the bracket for hanging the unit to your new location.
Unplug the cord and empty the water tank before moving the unit.
Before operating the unit, make sure the unit is settled horizontally and the tank
is secure in the unit.
Don't cover the air
vents.
Place the unit on a stable, horizontal
surface, or fit on a level wall,
otherwise water may leak.
Knockout
TO MOVE
