-PV output to solar charge controller
After all panels get wired by Y-branch connector, use the 16.4ft 8AWG
solar-controller cable to connect the solar panel array output wire with
the controller.
MC4 terminals to plug the Y-branch connector terminals, and the
copper-head terminals to the controller PV input port, + for positive
cable, - for negative one.
-Place the inverter
The inverter should be put indoor to avoid raindrop or any other weather
issue that may causes electrical fault. Here some notice should be
followed:
2.Use 1 pair of Y-branch connector to wire 2 strings together in parallel.
Diagram as below:
-12-
