ECO-WORTHY 400, Руководство пользователя

Страница: 17 / 19

17
Usage:
(1) Fixed the control box on the frame of solar panel, You can install the light
sensor a little higher than the face of solar panel so no shadow on the sensor.
(2) Connect the controller to the linear actuator (Note the direction mark on
the terminal of controller)
(3) Connect white and black wire to power supply.
(4) Press the remote controller
“1” button to enter the manual control, remote
led display light will flash. (Please pull out the antennas before testing)
(5)
“3/4/5 /6” button. ”3” –South,”4” –North,”5” –West,”6” –East,
Please press the direction button to check the right direction solar tracker
moving, if the solar tracker moves to the opposite direction, you should change
the terminal connection of control box and linear actuator
(6)
“2” button to exit the manual States. Remote control light goes out