-6-
Step 3: Attaching the panel to the roof
Picture below illustrates the correct way to use the well-nut. The rubber
flange has to be flushed on the roofline. The Z-Bracket,along with the
flat washer and lock washer, hold the well-nut in place when the screw
is fastened.
Gently insert the well nut into the drill hole . Be careful not to push the
well nut flange completely into the holes. Make sure the flange is
flushed on the roofline.Before attaching the panel to the roof, a film of
caulk can be laid between the RV roof and the Z-Bracket. Even though
the well-nut provides a watertight bond, this provides additional sealant.
Содержание 100W
Страница 1: ......