on the right of the
Schedule Setting Report
, where shifts 1
–24 are shifts those set in the
Attendance setting report
and
shift 25 is for leave and shift 26 is for out.
Notes:
1. The shifts of only 31 days can be arranged in one schedule setting report. For example, if the scheduling date is
2013-1-1, the schedule setting report contains the schedules of 31 days after 2013-1-1, that is, schedules from
2013-1-1 to 2013-1-31. If the scheduling date is 2013-1-6, the schedule setting report contains the schedules of 31
days after 2013-1-6, that is, schedules from 2013-1-6 to 2013-2-5.
2. If no schedule setting report is set, all employees use the
Shift 1
by default from Monday to Friday.
6.3 Upload Att. Setting Report
Press
▼ key to select
Upload Att.
Setting Report
, then press
[
M/OK
] to uploading table.
Uploading tabl
e……
Data upload succeed! Press [
M/OK
]
key to close the prompt box, and then
take out the USB disk.
The employee information, shifts, and departments in the setting report can be viewed either on
User
,
Shift set
, and
Dept
set
interface of the device or in downloaded standard reports.
Note
: If the schedule time format is incorrect, a prompt box shown in the following figure will be displayed:
For the correct schedule time format, see "What is the
correct time format used in the setting reports" in the
Appendix 3 ECO TA500 FAQs
.
Press [
M/OK
] key to confirm and close the prompt box. Re-upload the attendance setting report after modification.
22
