866.463.2611 • www.ecosystemsdisplays.com
Step 1
bolt
set
screw
V4
When Assembled
Item
1
2A/2B
3A/3B
4A/4B
5A/5B
6A/6B
Qty.
2
1/1
1/1
1/1
1/1
1/1
Description
Baseplate
48” CEI110 Horizontal Extrusion
48” CEI110 Horizontal Extrusion
40.25” CEI110 Vertical Extrusion
40.25” CEI110 Vertical Extrusion
46.8125” S91 Vertical Extrusion
Steps:
1) Attach Baseplate [1] to horizontal [2A] using
bolt & wing nut.
2) Attach Baseplate [1] to vertical [6A] using bolt.
3) Connect horizontals [2A-3A, 2B-3B] and
verticals [4A-5A, 4B-5B, 6A-6B] together.
See CEI-110 Frames Assembly in the General
Information Pages.
4) Connect Horizontal and Vertical assemblies together.
See CEI-110 Frames Assembly in the General
Information Pages.
5) Connect vertical assembly [6A-6B] to
vertical assembly [4B-5B], using V4 connectors
& bolts as shown.
6) Connect lighting
Power Cords
and attach
Transformers. See
Light to Light Attachment
&
Light to Transformer Attachment
details.
7) Attach
SEG
to assembled frame.
See
SEG Graphic Install
in the
General Information Pages.
+
+
+
-
-
-
to power
Lights
Male
Female
Transformer
Light to Light Attachment
Light to Tranformer Attachment
1
2A
Transformer
Transformer
Transformer
Transformer
3A
SEG
4A
4B
6A
6B
5B
5A
2B
Power Break
3B
1
Power Break
to power
to power
to power
to power
Slide V4 Connectors
into groove of vertical
extrusion. Tighten
Set Screws to secure
in place. Use bolts to
attach vertical to
V4 connector.
