1
、
Matters needing attention
●
Please read this instruction carefully before installation.
●
Check out all accessories after getting the product.
●
Inspect the device carefully before installation in case of loose for transportation maintenance
regularly.
●
For guarantee the life of product , don’t put it on the wet place and also not use it in the place over 40
degree.
●
Don’t put the product on the shakable place.
●
Check the power supply voltage before turning on lamp. Power supply should not be over the voltage
range .The lamp will be damaged if the power is too high, it can’t work if the power is too low.
●
After power off, if it is need used again, please cool down over 10 minutes.
●
Disconnect the power before installation or removing. In case of malfunction, please ask the
professional technician to repair .
2
、
Installation guide
●
Lift and hang up the lamps on a structure/truss through the hook clamps.
●
Disconnect the power before installation .
3
、
Accessories
●
Product 1 Pcs
●
Power cable 1Pcs
●
Manual instruction 1Pcs
4
、
Specification
Power supply
AC 100----240V ,50/60Hz
Power consumption
45W
Light source
14pcs 3W warm white LED
DMX control channels
1CH/4CH/7CH/14CH
Light beam
2
°
Control mode
Auto running
、
Master—slave
、
Sound
、
DMX 512
Dimension
1000x152.7x70mm
Weight
3.88kg
5
、
Menu map
Содержание ED MATRIX BEAM 14
Страница 1: ...ED MATRIX BEAM 14 User Manual...
