23
000
-
199
No function
200
-
209
Reset(Stay 3 seconds)
210
-
240
No function
241
-
255
Sound control mode
Attached list 4: LED color select details
Value
Function
LED color
000
- 007
No function
008
- 090
WW
091
- 173
CW
174
- 255
WW+CW
Ⅷ
.Product specification
Item
Specification
LED color
CW/WW
LED quantity
4 pieces
LED Power
32W
LED Dimmer
0-100% linear dimmer
DMX socket
3pin DMX(DMX+.DMX-.Ground)
DMX address
DMX512
Channel
2Chan/16Chan/23Chan
Function
Show mode,Sound active mode,DMX512 mode,DMX
static color mode,DMX strobe function,easy control
Rotation angle
DMX X axis angle 540°,Y axis 180°
Sound active X axis unlimited rotation
Voltage
AC100-240V/50-60Hz
Fuse
F3AL250V(5×20mm)
Power consumption
100W
Power factor
0.969PF
Currency
0.439A
LED Currency
(1 meter)
WW 20000Lux(2pcs)
CW 38000Lux(2pcs)
1. When opening the packing, take all accessories out, and remove the light to a
horizontal table for good operation. First check whether the accessories are
complete, then check carefully whether the whole light has no damage. If there is
any damage, please contact us as soon as possible.
2. AC Power:Check whether the local power supply is accordance with the
requirements of the product rated voltage.
3. The product is only suitable for indoor working environment. The light should
keep dry, keep away from wet, overheat or dusty environment. Don't come into
contact with water and other liquids to prevent or reduce the risk of electric shock
or fire.
4. Please do not install the light directly on the surface of the combustible
substance.
5. The people who install, operate and maintain of light professional certificate
required.
6. When there are faults of the light, please stop using the light immediately. Don't
try to repair, please contact the nearest authorized technical assistance center, if
the parts damage, always use the same type of parts replaced.
7. Don't touch any electrical wiring in the process of operation to prevent the risk
of electric shock.
8. To make sure the light working environment temperature, the highest do not
exceed 40
℃
，
the lowest do not exceed - 20
℃
.
9. Under the stable cooling working situation, the highest temperature of the
housing of the light can reach 80
℃
, please do not touch.
10. The light is design according to the type of electric shock protection. The light
should be use in good connection grounding power system and the
earth sign port of the light should be connected to the installing fixtures.
11. Do not use the damage of the insulating layer wire and also do not use the
power cord overlap on the other wire. When not in use or clean the light, please
disconnect the power, don't pull the plug in hard or just drag the wires.
12. There are no components inside for maintenance. Before start operation the
light, please check whether all of the shell is installed. In the case of the shell
open used the light is prohibited.
Note: Under any installation, maintenance and clean the light, please confirm that
has cut off the power cord!
