9. Refer to Appendix A for connection steps via Hyperterminal or other terminal
programs.
APPENDIX C
PINOUT OF DB9 CONNECTOR
APPENDIX D
APPLICATION EXAMPLES
Here are 3 widely used examples installed by many users of the UV-100. These are
shown
for reference only
; for more details contact Eco Sensors Tech Support.
REMEDIATION EXAMPLE
Ozone’s cleaning and disinfecting properties are well known. Its ability to break down
bacteria and a wide range of contaminants with almost no residue is just beginning to be
used in real-world applications. The following is an example of one of Eco Sensor’s
Customer setup to remove mold from rooms and combined spaces in flooded homes:
Items:
UV-100
Ozone generator(s) (UV 550 Pro or similar)
Power relay (s) for generator and fan (optional)
Indicator light for OSHA limit
4-20 mA current loop
To destroy mold the space is held at a very high Ozone level for a predetermined
amount of time. The generator is controlled using the set point relay on the back of the
UV-100 to hold Ozone.
After the Ozone “dwell” interval is complete, generator power is shut off or UV-100
generator ON level is set to zero. Over the course of a few hours the Ozone will decay to
zero. In this particular installation an indicator light was tied to the 4-20 mA output to give
an “all clear” indication when the space was reading under the OSHA immediate limit of
0.3 PPM. 4-20 mA scale is set to 4 mA = 0 PPM, 20 mA = 1 PPM.
COLD CONDENSING EXAMPLE
Items:
UV-100
Tygon SE-200 Teflon lined tubing, length variable
Small moisture trap
13
Remediation Space
UV-100
Ozone
Generator
4-20mA
Current
Loop
Safety
Indicator
Relay Output
4-20 mA Output
