14
restore the original condition. Please use our
ecomesh
®
- service, which guarantees
quality restoration. Continuous loss of rings in several places indicates that the ring braid
is largely weakened (due to wear, fatigue, and the likes). The glove must then be withdrawn
from use. For safety reasons, a specialist company should decide whether the repair is still
economically viable and can be advocated.
ecomesh
®
„T”
safety gloves have a polypropylene textile band. It is very durable,
tear-resistant, and flexible at all temperatures that are common in the field of use, heat and
cold resistant, as well as resistant to the usual detergents and disinfectants, acids and
bases. Nevertheless, changes may occur that reduce the wearing comfort or the usability
(the tape becomes harder or softer, brittle, sticky, etc.). If this happens, send in the glove
to replace the wristband strap for repair. The maximum cleaning temperature of 75 °C
should not be exceeded.
ecomesh
®
„E”, „D”, „DC” and „M”
Sicherheitshandschuhe
full metal safety
gloves have a wristband made of metal ring fabric. It is very durable, tear-resistant, and fle-
xible at all temperatures that are common in the field of use, heat and cold resistant, as well
as resistant to the usual detergents and disinfectants, acids and bases. If a defect is found
on the fastener or the fastening rings, the glove must be repaired. The maximum cleaning
temperature of 75 °C should not be exceeded.
Cleaning:
ecomesh
®
safety gloves must be cleaned completely after use, including the wrist-
band. If no special glove washer is available, we recommend cleaning it with warm water,
at approx. 50 °C, by adding commercially available cleaning agents. Gloves and wristband
should be brushed off vigorously. After the protective glove has dried, it must be treated
with a disinfectant commonly used in the food industry. For storage, the gloves should be
suspended, if possible, in a special storage cabinet. After drying, the protective glove must
be treated with a disinfectant commonly used in the food industry. For storage, the gloves
should be suspended, if possible, in a special storage cabinet.
During each cleaning, the
ecomesh
®
safety gloves must be inspected for any defects in
the belt or holes in the fabric. Likewise, the fabric should be checked for weakened spots. Gloves
with damaged or weakened ring fabric must not be used and must be set aside for repair.
All
ecomesh
®
safety gloves are a quality product. Nevertheless, chemical compo-
unds, detergents, fatty acids can reduce the required protection level. Also wear, aging and
damage can influence the intended use. If in doubt, give the glove to a specialist company
for inspection.
English
These safety gloves are products subject to mandatory safety testing!
They may only be used in their originally delivered shape.