background image

10

CARE AND MAINTENANCE

Air freshening filter

Air freshening filter

1

2

Maintenance 

Checks before operation

   If you plan to idle the unit for a long time, perform the 
   following:
   (1) Operate the fan for about half a day to dry the 
         inside of the  unit.
   (2) Stop the air conditioner and disconnect power. 
         Remove the batteries  from the remote controller.
   (3) The outdoor unit requires periodic maintenance 
         and  cleaning. Do  not attempt to do  this yourself. 
         Contact  your dealer  or service engineer..

   Check that the wiring is not broken off or disconnected.

   

Check that the air filter is installed.

   Check if  the air outlet or inlet is blocked after the 
   air conditioner has not been used for a long time.
   
   
  

    Do not touch the metal parts of the unit when 
    removing the filter. Injuries can occur when 
    handling sharp metal edges.
    Do not use water to clean inside the air conditioner.
    Exposure to water can destroy the insulation, 
    leading to possible electric shock.
    When cleaning the unit, first make sure that the 
    power and circuit breaker are turned off. 

Caution

4. Remove the  

Air Freshening Filter

(Optional filter

    included: Plasma Dust Collector/Silver Ion filter /
    Bio filter /Vitamin C filter/3M air purifier filter) from
    its support frame.(The removing and installation
    method may differ slightly, see the pictures 
    marked       and       on the left. 
       Clean the air freshening filter  at least once a 
        month, and replace it every 4-5 months.
       Clean it with vacuum cleaner, then air dry it in 
       cool area.

5. Install the air freshening filter back into position.
6. Insert the upper portion of air filter back into the 
    unit,  taking care that the left and right edges line 
    up correctly and place filter into position.

1

2

Do not touch the Plasma Dust Collector 
Filter within 10 minutes after opening the 
front panel, it may cause an electric shock.

Содержание ECO902SQN

















Отзывы: