Scent Cartridge Fitting
Press the scent cover (6) and insert
the cartridge (after removing pull
cover). Press again to close. The
unit can be used without scent if
preferred. Please note that for the
small number of asthmatics who are
sensitive to perfumes etc. they may
have a similar reaction with the scent
cartridge. These people should use
the scent cartridge with caution.
Technical Data
1. Concentration of anion: 1.5 x
≥
10
6
ions/cc or above
2. Air cleaning rate:
≥
90%
3. Air flow: H: 3m/s, M: 2m/s, L: 1m/s
4. Input voltage: 220-240V~/ 50Hz
5. Rated power: 40W
6. Working Environment: Temperature –10-+55
°
C; 95% RH
7. Net dimension: 300 x 300 x 175 (mm)
8. Net Weight: 2.55kg
9. Gross Weight: 3.2kg
10. Effective area: 15m²
Maintenance
CAUTION: DISCONNECT FROM POWER SUPPLY BEFORE
CLEANING
1. Remove the dust from the ion outlet with dry brush as required.
2. Clean the pre filter with water every 2 months to remove dirt
and odour, replace with it is completely dry.
Replacement Filters
•
Replacement filters are available from our Help Desk on 020 8459
2458
•
Replacement scent cartridges are available from our Help Desk on
020 8459 2458
Product Disposal Information
Do not mix products bearing the crossed out bin symbol (below)
with your general household waste. For the correct collection
and treatment of these products take them to the collection points
designated by your local authority. Alternatively contact the
retailer who sold you the product.
