ECM Manufacture 89250, Руководство пользователя

Страница: 26 / 38

ENGLISH
Translation of the original German user manual
25
For one portion tap 1 time briefly on the grinding button with the portafilter.
Grinding starts and the time runs on the left side of the display backwards from the preset time t1
When the programmed time for a portion is reached, grinding stops automatically.
You can stop the grinding process early by briefly tapping the grinding button. The display
will show the
remaining time of the preset time that was not required.
Double Shot
Press:
The line is now on the right side of the display
For two portions briefly tap with the portafilter on the grinding button.
Grinding starts and the time runs on the right side of the display backwards form the preset time t2
When the programmed time for a portion is reached, grinding stops automatically.
You can stop the grinding process early by briefly tapping the grinding button. The display
will show the
remaining time
of the preset time that was not required.
TIP: Programming the portions after determining the remaining time.
By determining the remaining time of a portion in the Standard Mode, you can easily program the grinding
times
t1 and t2 accordingly.
Single Shot (one portion) is programmed in menu item t1 .
Double Shot (two portions) is (are) programmed in menu item t2 .
a. Programming your personal single shots t1:
Stop grinding early as desired by pressing the grinding button. After the remaining time appears on the
display, call up
t1 via the display.
First press
‘
+
’
and
‘
-
’ simultaneously until ‘
t1
’
appears on the display.
Press
‘
+
’ in order to reach the submenu of ‘
t1
’.
Now you can reduce the remaining time from the
preset grinding time
‘
t1
’
in tenths of a second by
quickly pressing
‘
-
’
(increase the time again with pressing )
For example: the preset time ‘
t1
’
was 4 seconds
and your remaining time was 00.5 seconds. This
results in the new grinding time for
‘
t1
’
of a portion
of 03.5 seconds