Eclipse TD520SW, Инструкция по эксплуатации

Страница: 17 / 22

37
JAP
ANESE
ENGLISH
FRANÇAIS
2
Play the audio source.
Set the ampli fi er volume to the level you normally listen at.
3
Increase the subwoofer's
volume and balance the
volume with the speakers
being used.
You can also adjust the
volume with the volume
control on the rear panel.
Adjusting the LPF
This function cuts off audio with a frequency higher than the set frequency.
For CDs and similar materials, we recommend adjusting the LPF with the subwoofer, and for
surround audio sources such as Blu-rays, we recommend turning the L.P.F selector switch off
and adjusting the LPF on the player or AV ampli
fi er.
1
Turn on the L.P.F selector
switch.
■
Adjusting the audio
2
Set the LPF.
You can also adjust the
volume with the L.P.F
control on the rear panel.
If the mid-low range is insuf fi cient, set the frequency higher.
(Range: 30 Hz to 150 Hz)
Rear panel
L.P.F selector switch
Turned on
Adjusting the volume
1
Set the volume to "-"
(minimum).
■
Rear panel
Volume control
Turned on
Remote
control
Front panel
(VOL/LPF)
or
Remote
control
Front panel
(VOL/LPF)
or
td725swmk2̲en.indd 37 2014/04/14 17:51:46