5
Eclipse PulsePak Valve Train Segments, V1, Installation Guide 791-2, 8/10/2010
Safety
Important notices for safe operation of the burner system
will be found in this section. To avoid personal injury,
damage to property or the facility, the following warnings
must be observed. Read this entire manual before
attempting to start the system. If any part of the
information in this manual is not understood, contact
Eclipse before continuing.
Safety Warnings
Ŷ
The valve trains covered in this manual may be
designed to deliver fuel gas to the burner. All fuel
burning devices are capable of producing fires and
explosions when improperly applied, installed,
adjusted, controlled or maintained.
Ŷ
Do not bypass any safety feature; fire or explosion
could result.
Ŷ
Never try to light a burner if it shows signs of
damage or malfunction.
Ŷ
This manual provides information for the use of
these valve trains for their specific design
purpose. Do not deviate from any instructions or
application limits in this manual without written
advice from Eclipse.
Capabilities
Only qualified personnel, with good mechanical aptitude
and experience with combustion equipment, should
adjust, maintain, or troubleshoot any mechanical or
electrical part of this system.
Operator Training
The best safety precaution is an alert and trained
operator. Train new operators thoroughly and have them
demonstrate an adequate understanding of the
equipment and its operation. A regular retraining schedule
should be administered to ensure operators maintain a
high degree of proficiency.
Replacement Parts
Order replacement parts from Eclipse only. Any customer
supplied valves or switches should carry UL, FM, CSA,
CGA and/or CE approvals where applicable.
DANGER
NOTICE
2
