Advanced Set-Up
Advanced Set-Up
To activate the
SET-UP
Menu, first remove the three rubber grip screws from
the right hand side of the frame
(See Figure 4.4)
and peel back the rubber
grip to expose the PCB inside the frame. Press and hold the
Set-up
pushbutton, which is located on the PCB above the battery
(See Figure 4.5)
.
After one second, the
MODE
parameter will be displayed - this is the first item
on the
SET-UP
Menu
(See Figure 4.6)
Press the
Lower
pushbutton to scroll down through each of the items on
the menu. Once the last item has been displayed, pressing the
Lower
pushbutton will cause the first item to be displayed.
Press the
Raise
pushbutton to scroll up through each of the items on the
menu. Once the first item has been displayed, pressing the
Raise
pushbutton
will cause the last item to be displayed.
Press the
Select
pushbutton to select the displayed item.
Selecting
BACK
will return the display to the display from which the
SET-UP
Menu was selected.
The Set Up Menu
FIGURE
4.5
FIGURE
4.4
FIGURE
4.6
Advanced Set-Up
28
29
