Eclipse EC-P8, Руководство пользователя

Страница: 14 / 40

14 P0031-LU-02.01
Test Bell & Outputs -
12*
This option allows the bell, strobe and any outputs that have the “User Test” attribute to be
switched on and off so that the devices connected to them may be tested. Normally the bell
and strobe outputs are connected to an external sounder unit.
To test the bell and strobe, please proceed as follows:
Ur
User Menu:--
12: Test Bell
Output Test 1-4:
Enter your access code .
????
Use the following keys to toggle output:
= Bell Output
= Strobe Output
= User Test Outputs
= Alarm Sounder
e.g. Enter 1234 to select all.
1
2
3
4
Ot
Repeat step 3 to toggle outputs on or off.
When finished press to exit the menu.
R
Enter
12*
to select Bell Test
Ot
Output Test 1-4:
Strobe Active
Output Test 1-4:
Bell Active
Enter or to exit the user menu.
99* R
User Menu:--
01: Stay Arm 1
Ur
St
Output Test 1-4:
User Test Active
BE
UT
Output Test 1-4:
User Test Active
AL
Only the outputs that have been programmed by your installer are activated during
the “User Test Outputs” option.