15
Operation and Maintenance of CD Discs
◇
Please take out the disc by holding the brim of the discs as below, please try to not touch the
shinning side of the disc (Data Storage Side)
◇
Please don’t attach any labels on the side of the disc. Do not scratch the surface of the disc.
◇
When the disc is being played, the rotate speed will be very high. Please do not use any
damaged, scratched, cracked or bent discs to avoid causing unit damaged.
◇
Fingerprints or Dirt on a disc will impair the reflective light of the disc and will affect the
signal’s quality directly. The poorer the signal’s quality is, the poorer the playing effect is.
Please use the soft cloth to wipe the disc from the disc center towards the outside direction.
If the disc is very dirty, please use a wet soft cloth to wipe it firstly, and then use the dry soft
cloth to wipe it again. Please do not use detergents, benzene, thinner, antistatic liquid or other
solvents. Otherwise it will damage the surface of the disc.
◇
Please put the discs into the original boxes where they are so as not to bend them. Do not put
the discs at the place of high temperature, high humidity or direct sunshine, because the bad
environment will also make the discs damaged.
◇
Please read the instruction label for the discs.
www.eclipse-electronics.com.uy
