Page 6 of 9
3
.
BATTERY SERVICE ENVIRONMENT
4
.
SPECIAL ATTENTION
In order to make full use of the energy efciency of the battery and prevent
accidents such as leakage or heat generation,please prohibit the following ;
● Do not immerse the battery in water. If the battery is immersed in water do not
approach. Contact qualied personnel to remove the battery and dispose of
it safely.
● Do not charge, discharge or leave the battery at temperatures over 60°C.
Keep away from re, hot temperatures or corrosive substances. Failure to do so
can cause battery overheating. Battery overheating can lead to res and
potential danger and/or injury.
● Do not charge the battery at temperatures below 0°C.
● Do not reverse the positive and negative terminals. Do not short circuit the
positive and negative of the battery.
● Do not wire the battery in series under any circumstances. Contact your supplier
or qualied battery installer before wiring in parallel.
● Do not reverse polarity when attaching to a charger. Never attach the battery
directly to any electrical outlet.
● Do not transport or store the battery together with metal objects such as
hairpins, necklaces, etc.
● Do not strike, trample, impact, drop or shock the battery.
● Do not directly weld the battery connections. Do not pierce the battery with a
nail or other sharp objects.
● Do not use the battery in any location where static electricity and magnetic
eld is strong. Doing so may be damage the battery protection circuit.
● Do not overload the battery.
● Do not alter the circuit board. This could damage the internal circuits and
cause battery failure.
● Do not deform or damage the outside of the battery case. Damage to the case
may cause electrical component failures and lead to battery instability.
● Do not open or remove the case.
● Do not overcharge or over discharge the battery.
● Please only use chargers designed to work properly with this battery.
Battery discharge ambient temperature is -10°C~ + 55°C (When the ambient
temperature >45°C, please pay attention to the ventilation and heat dissipation).
Charging temperature is 0°C ~ + 45 °C. Ambient humidity RH is ≤85% . Pay
attention to eliminate moisture when the ambient humidity is >85%. Condensation
on the surface of the battery should be avoided
.
