![background image](http://html.mh-extra.com/html/eclipse/ch3083/ch3083_owners-manual_533767087.webp)
87
Mounting instruction
Names of lead wires and destinations (refer to Page 89)
No.
Name
Wire color
Destination
1
ACC
Red
Connect where the power comes on
when the ignition is in the ACC
position.
2
B+
Yellow
Connect where the power is
constantly available, regardless of the
ignition switch's position.
3
Ground
Black
Connect where good body
grounding is available.
4
Antenna power supply Blue
Connect to the automatic-antenna
control terminal of the vehicle.
5
Illumination power supply Orange/White
Connect to where power comes on
when the headlights are turned on.
6
Control power supply
Blue/White
Connect to the control terminal for
the external amplifier, or to the RCA
output connectors of a DSP or EQ.
7
E-LAN terminal
Connect to the E-LAN terminal of the
CD changer, DSP, etc.
8 & 9
Line-out terminals
Connect to the RCA input connectors
of an external amplifier.
10
Line-out terminals (Nonfader)
Connect to the RCA input connectors of
a DSP or EQ, or the RCA connectors of
a woofer amplifier.
11
Speaker leads
Connect them to their respective
speaker leads.
Note
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
Caution
Never connect the power supply to the speaker leads,
otherwise it cause damage to the main unit.