![background image](http://html.mh-extra.com/html/eclipse/cd-5425e/cd-5425e_installation-manual_533731004.webp)
- 4 -
Deutsc
h
English
E
spañol
Français
Italiano
Nederlands
Svenska
Names and functions of ter
Names and functions of ter
minals
minals
•
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
•
The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
•
If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
MAIN UNIT
1
INTERCONNECTING CABLE
(Power and speaker connector)
2
1
2
3
16P
B
C
ANTENNA PLUG
A
D
E
•
This illustration shows the CD8445E. The CD5425E differs slightly from this illustration.
•
Refer to page 5 for details on the wire colours and connection points for interconnecting cables
.
•
Refer to page 5 for details on connection points to for the main unit cables and
terminals.
2
Tip
A
E
Tip*1
•
The positions of the B+ and ACC pins on the connector may vary
depending on the vehicle. In such cases, replace the end of the
connector. Ask your dealer for details on connector pin positions.
Tip*1
TO VEHICLE-SIDE
CONNECTOR
4