30˚ or less
Level (reference)
Front
- Installation angle -
- Installation preparation-
To maintain proper function, the unit must be mounted
less than 30 degrees. If the angle is in excess of 30
degrees, DVD/CD skipping and improper DVD/CD and
Memory Stick ejection may occur.
Tip
Before the main unit installation, be sure to remove the
caution label.
1
Tip
In the event that the main unit requires shipping, reattach
the caution label to help prevent potential damage that may
be caused by shipping.
Caution label
Caution
Main unit
1
Insert the mounting sleeve into the opening in the
vehicle dashboard or console box.
1
Use a screwdriver or a similar tool to bend the tabs in
the mounting sleeve to secure the mounting sleeve.
2
- Main unit installation example (If installing the main unit using the mounting sleeve) -
•
•
Carefully bind any excess length of cord that is
connected to the main unit and secure it to an area of
empty space in the vehicle so that it does not move
around or get caught in the main unit or vehicle-side
equipment. If the cords are not handled correctly,
operating problems or short-circuits may occur, and this
may result in the danger of fire or other accidents.
•
•
Connect all cables before installing the main unit.
Tip
Bend the mounting
tabs.
Dashboard or
console box
Mounting sleeve
7
example 2
3
By adjusting the positions of the brackets, the main unit's
installed depth can be adjusted.
example 1
Front of vehicle
Attach the side brackets to the main unit using flathead
screws.
Be sure to use the supplied accessory mounting screws
(M4 x 6) as the mounting screws. If any other screws
are used, they may damage the inside of the unit.
Tip
Side brackets
Flat head screws
(M4 x 6) x 2
Main unit
1
Front of vehicle
11
Side brackets
Side brackets
Main unit
1
Main unit
1
Screw
position
Screw
position
- 11 -
English
E
nglish
E
nglish
E
nglish
E
nglish
E
nglish
English
Installing the main unit
Installing the main unit
8
8
8
