- 7 -
Wire colors and connection points for connection wires
,
,
,
,
and
7
6
5
4
3
2
Never connect the power supply to the speaker wires (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Antenna power supply (Blue)
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
Connect to the control terminal for the external amplifier, etc.
Front speaker output wires
Connect to the front speakers.
White:
Left +
White/Black:
Left -
Gray:
Right +
Gray/Black:
Right -
Rear speaker output wires
Connect to the rear speakers.
Green:
Left +
Green/Black:
Left -
Purple: Right +
Purple/Black:
Right -
Cellular phone mute wire (Pink)
If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone.
If not, keep the Audio Mute lead free of any connections.
Ground (Black)
Connect where good body grounding is available.
Vehicle speed pulse signal wire (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Parking brake signal wire (Red/White)
Connect to the parking brake signal terminal.
Reverse signal wire (Green)
Connect the reverse signal output of the vehicle to this terminal.
Front line-out terminals
Connect to the RCA connector of an external amplifier.
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
Line-out terminals (Sub-woofer)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
12
11
10
9
8
7
6
5
4
3
2
1
Español
Français
Italiano
Nederlands
Svenska
English
E
F
D
