GENERAL SAFETY RULE
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE
TO READ
THE DIRECTIONS
CAREFULLY
FOR USE AND TO FOLLOW
THE INSTRUCTIONS
THEY
CONTAIN. IF YOU DO NOT RESPECT THE
INFORMATION WRITTEN IN TH
IS
INSTRUCTION MANUAL THE
WARRANTY
MAY
BE
VOIDED
.
1.
Work area safety
a. Keep work area clean and well-lit. Cluttered or dark areas invite
accidents.
b. Keep children and bystander
s
away while operating the hydraulic
punch
driver. Distractions cause you
to lose
control.
c.
Please do not use or store this tool under high temperature, or one
surround
ed
with corrosive
atmosphere
. Pay attention to the sealing
kits
(O-Rings)
becoming
old and/or worn out (leaking)
.
2.
Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating the tool. Do not use the tool while you are tired or still under
the influence of drugs, alcohol or medication. A moment of inattention
may result in series personal injury.
b. Use safety equipment. Always use safety equipment such as eyes
protector, safety cap etc
to reduce
the risk of personal injury.
c.
Please use the tool properly
. Th
e tool with correct power will do the
job
better and safer at the rate for which it was designed.
3.
Service
Have your Hydraulic Punch Driver serviced by a qualified service technician
using only
original
replacement parts. This will ensure that the safety of the
Hydraulic Punch Driver Kit is maintained.
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the tool which carry important safety information.
If unreadable or missing,
contact
your distributor
to replace.
2.
This product is not a toy, keep it out of reach of children.
3.
Do not slide your fingers in the dies profile.
4.
Do not use the tool without punch die.
5.
Do not use hands to check for leakage.
6.
Do not use this tool near live circuits.
7.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator
.
SAVE THIS INSTRUCTIONS
Содержание 902-598
Страница 6: ......
