2
．
Description of the components.
Code
Name
Function
1
Active handle
Operates the handle while punching
2
Body
Fixes the handle and punch & die set
3
Hex-screw
Fixing the holder
4
Die
For punching
5
Punch
For punching
6
Hook
For locking the active handle
7
Fixed handle
Guides the work
OPERATING INSTRUCTIONS.
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Use this tool for the manufacturer’s intended purpose only. Use other than that which is
described in this manual can result in injury or property damage.
HOW TO ASSEMBLE THE PUNCH AND HOLDER:
1.
Select the appropriate punch die set.
Do not exceed the rated capacity of this tool, otherwise it will
cause a component failure, which could throw broken parts
with great force. Failure to observe this warning can
result injury or death.
2.
Insert the punch into the upper shoulder; use the nut to lock it with hex wrench.
3.
Insert the die into the lower shoulder, use a hex wrench to screw the nut to lock the
die.
4.
Open the active handle, place the plate between the punch and die
An improper setup could cause the components damage.
5.
Press the active handle lever completely, the scrap comes out after punching, keep the
active handle locked with the hook.
6.
Do not punch on hard metal plate or punch over the
max thickness.
Do not allow anyone to stand around the tool while operating it. Ignoring this
warning can result in injury or damage.
