− 13 −
Important Safety Instructions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
1.
Read instructions
All safety and operating instructions should be
read before operating unit.
2.
Follow instructions
All operating and other instructions should be
followed.
3.
Retain instructions
The safety and operating instructions should
be retained for future reference.
4.
Warnings
All warnings on the unit and in the operating
instructions should be adhered to.
5.
General care of unit
Do not open or modify the unit as fire or
electric shock may result. Do not place flower
vases, potted plants, cups, cosmetics, drugs,
containers holding liquids, or small metal
objects on or near the unit. Do not place any
objects on the unit and do not insert or drop
metal,combustible objects or liquids into the
unit as such actions can cause fire or electric
shock. If liquid or foreign objects enter the
unit,disconnect immediately since continued
use may result in fire or electric shock. Do not
place the unit on tuners, audio decks or other
electric equipment. Do not use the unit as a
step or seat. The unit may tip over and cause
damage or injury. Consult a company customer
service facility for interior inspection,
adjustment or repair.
6.
Where not to use unit.
Do not use the unit in bathrooms, areas
exposed to rain or snow, on the shore, near
water or in humid conditions. Do not place the
unit in unstable locations, in kitchens, near
humidifiers, or in any location with likely
exposure to smoke or steam. Do not place the
unit in direct sunlight, near heating equipment
or close to open flames. Fire, accident or
malfunction may result. Do not place the unit in
locations exposed to cold air or direct draft.
Condensation, leakage current or thermal
damage may result. Do not use the unit in
dusty or dirty locations. Decreased heat
ventilation can cause thermal damage or fire.
7.
Unit heat
The bottom and sides of the unit can heat up
during use and should not be touched. Burns
may result.
8.
Positioning
When setting up the unit, position the legs
carefully and use a sturdy base. The use of
flimsy racks can cause damage. Take care in
handling.
9.
Moving the unit
When moving the unit, shut off power to all
connected equipment, and disconnect power
cords, connection cables, speaker cables and
other wires. Moving the unit while cables are
connected can cause damage to cables, fire or
electric shock. The unit is heavy and care
should be taken when unpaking, moving or
lifting.
Manufacturing also creates sharp areas on the
unit; use thorough care in handling.
10. Danger signs
If you notice a strange noise, smoke, unusual
odour or other abnormal condition, shut of the
unit,disconnect the power cord from the outlet
and have the unit inspected. Continued use
may result in fire or electric shock.
11. Electric storms
During electrical storms disconnect the unit
and avoid contact with the antenna and power
cord. Lightning can cause fire, electric shock
and malfunction.
