Eclipse Security Nubix HD Series, Руководство пользователя

Страница: 67 / 68

SYMPTOM MEASURES
No Power
If the power LED is not lighted, check the below items.
- Check the power plug and outlet. (Refer to the [Cautions for safety]
- Connect the power cord to the power connector of DVR properly.
No camera image
- Connect the camera cable to the DVR port properly.
- Check the connected monitor cable with DVR.
(Refer to the [Rear Panel Configuration] )
- Check the camera power and lens setting.
- As this may be caused by a temporary error, restart DVR.
- As camera setting may be wrong, initialize the camera and DVR.
※
How to initialize DVR
1. Main Menu > Configuration > Default Load > O.K > O.K
!! Caution: After DVR initialization, DVR setting is returned factory default.
8. APPENDIX
8.1Trouble Shooting
66
!! Caution: After DVR initialization, DVR setting is returned factory default.
Need to backup the configuration before initialize DVR.
Not record on DVR
If the recording LED does not flicker, check the below items.
- HDD should have enough space otherwise could not be recorded.
- Delete data in HDD or change the [HDD OVERWRITE] setting to [ON].
(Refer to the [ GENEL Setup ] – [ HDD OVERWRITE ])
- Replace the HDD because the HDD may be failed.
- Check the recording setup.
Not connected Network
If the network LED does not flicker, check the below items.
- Check the connected hub or router.
- Check the network cable and connection.
- Check the network setup.