7
Lift Chair Power Connection Setup
Warning!
If you are having a problem with the setup of your chair,
STOP
and contact your local
Eclipse Medical Inc. retailer immediately.
Note: Do not plug adapter into the wall power outlet until all connections are made.
1.
Place your lift chair near a properly wired standard wall outlet. This chair is designed for
indoor use only.
2.
While chair is in the seated position, place the back of the lift chair
30 inches (75 cm)
from
the nearest obstruction.
3.
Adjust the leg levelers to keep the chair stable. (varies by model)
4.
Turn the leg levelers clockwise to raise the chair and counter-clockwise to lower the chair.
5.
Locate the power adapter and connect 2 x 9V batteries (not included) to the battery backup
compartment at the back of the adapter.
Warning! To reduce the risk of electric shock
disconnect the power cord before installing or replacing batteries.
6.
Lay the low voltage connection cable (located at the back of the chair) where it will not be
pinched between the wood frame and the lift mechanism. If the low voltage connection
cable is not already connected to the external transformer, connect it at this time.
7.
Connect the hand control cable to the lift chair, if the cable is not already connected.
8.
Ensure the external transformer, power cord, and the low voltage connection cable are not
damaged or wet.
9.
Plug the electrical cord directly into the outlet. Do not use an extension cord!
10.
Lay the external transformer on the floor in an open, well-ventilated area where it will not be
an obstruction.
Note:
When sitting down in your chair, never “drop” into chair if it is partially raised.
Note:
The external transformer is packaged independently of your lift chair. Please do not discard
any packaging before locating the external transformer.
Содержание Lift Chair series
Страница 1: ...Lift Chair Instruction Manual ...