background image

INMANUUIN121 M. USO VI340-HC118G2 ING USA V.2016.10.06.DOCX                   2 

 

2. WARNINGS

 

It is important to read this manual carefully before using the device 

ECLERIS will not be held responsible for damage that can occur to the equipment due to not following the instructions or not observing the following 
criteria: 

 

Keep the equipment out of children reach. 

 

Do not install the equipment next to heat sources, such as heaters  

 

Install the equipment on a firm horizontal surface, in a well-ventilated area. 

 

Protect the equipment and accessories from direct solar light, dust, humidity and vibrations or excessive banging. 

 

Equipment not appropriate to be used near or around flammable anestheticmixture with air, oxygen or nitrous oxide. 

 

The equipment does not need sterilization. 

 

Do not put any container with liquids on top of the device. 

 

Main power cord and PROCAM HD cable are resistant to deformations and mechanical tensions however do not damage or avoid violent 
shocks to the cables. 

 

Do not use the equipment during electrical storms. 

 

Unplug the equipment when it is not being used. 

 

This equipment has to be connected to ground through a ground conductor in the power cable. This ground connection is essential for the 
safe use of the equipment 

 

Do not connect the equipment to devices that do not comply with IEC60601-1ed 3.0 or later. 

 

The device is provided with a connectable power cable that assures proper electrical isolation.If it needs to be replaced, the replacement 
will not be longer that the original cable and it needs to be certified under IEC 60245-1 or IEC 60227-1. 

 

In case of interference with other electro medical or electric equipment, we recommend increasing the distance between PROCAM HD and 
the other equipment to minimize these effects. 

 

Do not open the equipment. Maintenance and repairs must be done by ECLERIS or an authorized company. ECLERIS will not be responsible 
for the consequences of repairs or maintenance carried out by non-authorized personal.  

 

In case of any problem, disconnect the power cable 

 

The device must be used only by personnel informed of all this warnings. 

 

This instruction manual must be kept together with the equipment for future reference. If the equipment should be sold or donated this 
manual must be enclosed. 

 

Any use outside of the manufacturer specific intent use, will exclude ECLERIS of all liability. 

 

If by any of the following: 

 

Inadequate use of the equipment. 

 

Failure to use the instruction manual. 

 

Bad maintenance and care of the equipment. 

 

Repair or manipulation by unauthorized personal. 

…personal or material damage is produced to a third party, ECLERIS, the manufacturer and sales agent of this equipment, will not assume 
reasonability for said damage. 

The device should never be discarded with the household waste. Please check local regulations for electronic components disposal or 
recycling. It is the user’s responsibility to deliver the system to the proper location for disposal or recycle of electrical and electronic 
device  

 

Содержание PROCAM HD




















Отзывы: