USER MANUAL
–
Page
9
of
18
INMANUUIN155 Rev.2019.02.14 / ENG
4. Place the product to be infused into the product receptacle, verify that the suction nozzle
reaches the bottom of the container; and screw it on the front panel.
5. Turn on the equipment using the switch on the rear panel.
The device will show the following startup sequence on the display.
6. With the button
select between Flow and Vacuum the function you want to modify,
then by pressing the buttons
define the desired level of both parameters. The
most commonly used values are: Vacuum between 80% and 100%; and Flow around
50%.
Product to
be
infused