15
Press the numbers to change Group ID. For example, if you need change to 01,
press “0”, then press“1”.
Example:
8.1.2. Baud Rate
The Remote controller can be used to change the RS-232 baud rate.
Press the button
①
to switch between Group ID and baud rate function
Once the baud rate function (F0-F7) is shown, press “+” or “–” to select the
desired communication speed:
o
F0 = 2400 (default)
o
F1 = 4800
o
F2 = 9600
o
F3 = 19200
o
F4 = 28800
o
F5 = 38400
o
F6 = 57600
o
F7 = 115200
8.1.3. Special Functions
Pressing the
②
button for more than 3 seconds, will allow to factory reset the VEO
devices. The LED display will start blinking and when it turns to show “00”, the factory
reset is successfully completed.
